SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 303)

L
AYER
3/4 P
RIORITY
S
ETTINGS
13-15
Click Priority, IP Port Priority. Enter the port number for a network
application in the IP Port Number box and the new CoS value in the Class
of Service box, and then click Apply.
Figure 13-9 IP Port Priority
CLI – The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
* Mapping specific values for IP Port Priority is implemented as an interface config-
uration command, but any changes will apply to the all interfaces on the switch.
Console(config)#map ip port 31-11
Console(config)#interface ethernet 1/1 24-2
Console(config-if)#map ip port 80 cos 0 31-12
Console(config-if)#end
Console#show map ip port ethernet 1/5
31-16
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#