SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 322)

M
ULTICAST
F
ILTERING
15-6
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP
settings as required, and then click Apply. (The default settings are shown
below.)
Figure 15-1 IGMP Configuration
CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping 33-2
Console(config)#ip igmp snooping querier 33-9
Console(config)#ip igmp snooping query-count 10 33-10
Console(config)#ip igmp snooping query-interval 100 33-11
Console(config)#ip igmp snooping query-max-response-time 20 33-11
Console(config)#ip igmp snooping router-port-expire-time 300 33-12
Console(config)#ip igmp snooping version 2 33-4
Console(config)#exit
Console#show ip igmp snooping
33-7
Service status: Enabled
Querier status: Enabled
Query count: 10
Query interval: 100 sec
Query max response time: 20 sec
Router port expire time: 300 sec
IGMP snooping version: Version 2
Console#