Sanyo DSR-3709 - Manual (Page 100)

GENERAL SET 4
English
99
1
Press the [FUNC.] button.
The FUNC. indicator lights up and camera control mode is
activated.
2
The buttons on the digital video
recorder operate the dome cameras as
follows.
In camera control mode the indicator lights up for all the
following.
3
Press the [FUNC.] button
The FUNC. indicator turns off and the unit returns to
normal mode.
z In the following cases, when [FUNC.] button is pressed,
camera control mode does not start.
z
When displaying menu, search menu
z During playback (including when paused or
displaying copy menu)
z When in quad screen display, multi screen display (9
screens/ 16 screens), or plus screen display
z When zooming
z When displaying automatic selection
z When displaying monitor 2
z When PRESET, IRIS or FOCUS indicator is flashing
(during operation) and another button is pressed, the
operation is cancelled.
z [REC/STOP][TIMER] buttons perform the same
operation as in normal mode.
z In the following cases, camera control mode is
automatically disabled.
z
When no operation is performed for two minutes
z When the alarm activates
Operating dome cameras with the digital video
recorder
Button
Button name in
normal mode
Operation
1
[MENU]
button
[MENU] button
Displays camera internal
menu screen.
2
[ENTER]
button [EXIT/OSD]
button Selects in camera internal
menu screen.
3
[PRESET]
button
[QUAD] button
Switches to preset access
mode (indicator flashes).
Press [CAMERA SELECT]
button to move the camera
to preset position and
disable preset access mode
(indicator remains lit).
4
[AUTO PAN]
button [MULTI]
button
Starts automatic panning.
Perform another operation
to stop automatic panning.
5
[SEQUENC
E]
button
[MON2]
button
Starts automatic camera
selection.
Perform another operation
to stop automatic camera
selection.
6
[TOUR]
button
[PLUS] button
Starts TOUR.
Perform another operation
to stop TOUR.
7
[AF ]
button
[PLAY/STOP]
button
Use one-push auto-focus.
CARD CARD
MENU RESET
EJECT
11 8 7 2 1 3 4
12 10 9 6 5
[FUNC.] button
FUNC.
8
[IRIS ]
button
[STILL] button
Switches to iris adjust mode
(indicator flashes).
Press [ZOOM/INFO ] button
to close iris and [ZOOM/
INFO ] to open iris.
Press again to disable iris
adjust mode (indicator
remains lit).
9
[FOCUS]
button [SHUTTLE
HOLD] button
Switches to focus adjust
mode (indicator flashes).
Press [ZOOM/INFO ]
button to focus on nearby
objects and [ZOOM/
INFO ] to focus on far-off
objects.
Press again to disable focus
adjust mode (indicator
remains lit).
10
[ZOOM/
INFO]
button
[ALARM]
button
Press [ZOOM/INFO ] to
reduce screen.
Press [ZOOM/INFO ] to
enlarge screen.
Use for operation when in
iris adjust mode and focus
adjust mode.
11 PAN Shuttle dial
Pans faster the larger the
arc, and slower the smaller
the arc.
12 TILT Jog dial
Turn to the right to tilt up
and to the left to tilt down.
Finishing dome camera operation
Button
Button name in
normal mode
Operation
e00_l8hbg_us_7.book Page 99 Thursday, November 25, 2004 1:44 PM