Sanyo DSR-3709 - Manual (Page 81)

RECORD SET 3
80
English
SE
TTIN
GS
2
Turn the jog dial to change “OFF” to
“ON”, and then turn the shuttle dial
clockwise.
A message appears indicating automatic rate adjustment.
“NO” flashes.
[Settings] (‹ indicates default setting)
3
Turn the jog dial to select “YES” for
warning message, and then turn the
shuttle dial clockwise.
The cursor moves to recording rate and duration.
4
Turn the shuttle dial clockwise.
“REC RATE” for “PRE-ALARM RECORDING” flashes.
5
Turn the jog dial to set “REC RATE” (30
FPS, for example), and then turn the
shuttle dial clockwise.
(Default setting: 15 FPS)
“DURATION” for “PRE-ALARM RECORDING” flashes.
6
Turn the jog dial to set “DURATION” (10
SEC for example), and then turn the
shuttle dial clockwise.
(Default setting: 1 MIN)
The cursor moves to “ALARM TRIGGER”.
7
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
“PRE” appears in the operation display area. When an
alarm occurs, “ALARM” is displayed.
z Pre-alarm recording is carried out over the period
before alarm input as set by “DURATION”. In order to
playback pre-alarm recordings, carry out alarm search
(using the [SEARCH] button). (JP.31)
As playback begins at the point of alarm occurrence,
use the shuttle dial to move back into the area of pre-
alarm recording.
z When normal recording and pre-alarm recording are
performed simultaneously, audio will not be recorded
together with pre-alarm video.
Setting Description
‹ OFF Pre-alarm recording is not carried out.
ON Pre-alarm recording is carried out.
<WARNING>
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARE YOU SURE ?
YES
CHANGE:JOG SET:SHUTTLE
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 15FPS, DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 30FPS, DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
When pre-alarm recording settings have been
completed
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 30FPS, DURATION: 10SEC
=> (00694 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
EXIT/OSD
01-01-04 00:00:00 REC REPEAT EN A PRE 0000
02
Number of alarm
PRE display
e00_l8hbg_us_7.book Page 80 Thursday, November 25, 2004 1:44 PM