Sanyo DSR-3709 - Manual (Page 111)

COPY MENU SETTINGS 8
110
English
SE
TTIN
GS
Use the following procedure to load menu settings saved
on a CompactFlash card back into the digital video
recorder.
z When loading a menu setting file into the recorder, you
will be able to specify whether recording area settings
are to be copied. Normally, “COPY RECORDING
AREA SETTINGS” should be set to “NO”. If set to
“YES”, hard disk initialization will be carried out as part
of the loading process, and all recorded data will be
lost.
z Different menu setting file formats cannot be loaded.
Check that the version that is displayed in “DVR TYPE
VER.” matches before loading.
1
Turn the jog dial to select “LOAD
MENUS FROM CF”, and then turn the
shuttle dial clockwise.
<WARNING> screen is displayed.
2
Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
(1) The loading process begins.
(2) When this has been completed, “SYSTEM
INITIALIZING” is displayed and the display returns to
the normal screen.
Use the following procedure to copy recording area settings.
1
Turn the jog dial to select “COPY
RECORDING AREA SETTINGS”, and
then turn the shuttle dial clockwise.
“NO” flashes.
2
Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
The cursor returns to “SAVE MENUS TO CF”.
3
Turn the jog dial to select “LOAD
MENUS FROM CF”.
4
Turn the shuttle dial clockwise.
<WARNING> screen is displayed.
5
Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
The loading process starts.
When this has been completed, “SYSTEM INITIALIZING”
is displayed and the display returns to the normal screen.
z Normally, “COPY RECORDING AREA SETTINGS” should
be set to “NO”. If set to “YES”, hard disk initialization will be
carried out, and all recorded data will be lost.
Loading settings from a
CompactFlash card
<WARNING>
LOAD MENUS FROM CF!!
CONTINUE?
NO
LOADING FROM CF!
When copying recording area settings
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-03
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE $YES$ OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-03
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE $YES$ OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
<WARNING>
LOAD MENUS FROM CF!!
CONTINUE?
NO
e00_l8hbg_us_7.book Page 110 Thursday, November 25, 2004 1:44 PM