Samsung Digimax 202 - Manual (Page 16)

16
Connecting to a Power Source
Battery status
Battery indicator
The batteries are fully
charged.
Prepare new batteries.
There is no battery capacity.
Replace with new batteries.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+ / -).
1. Open the battery chamber cover by pushing in the direction of
the arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+ and-).
Using the batteries
[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]
The Digimax Battery Pack is a rechargeable
external Li-ion battery for use with most digital
cameras. These optional battery packs provide
long lasting power and their operating
performances are much improved over Ni-MH and
Alkaline batteries. This is due to the mass storage
lithium ion cell. Refer to the illustrations.
Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)