Samsung Digimax 202 - Manual (Page 37)

37
Metering
If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
INFORMATION
Sharpness
You can adjust the sharpness of the picture you want to take. You cannot check the
sharpness effect on the LCD monitor before you take a picture, because this function is
applied only when the captured image is stored on the memory. This menu is available in
every recording mode.
[ Spot metering zone ]
Sub menu Icon Description
The edges of the image are softened. This effect is suitable
for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized. The edges will
appear sharp, but noise may occur in the recorded image.
VIVID
NORMAL
SOFT
SPOT ( ) : The indicated area at the center will
be metered, as shown on the right.
This is suitable when the subject at
the center is exposured correctly
regardless of back lighting.
[ STILL IMAGE mode ]
SHARP
SOFT
NORMAL
VIVID
[MOVIE CLIP mode]
SHARP
SOFT
NORMAL
VIVID