Samsung Digimax 202 - Manual (Page 62)

62
Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup.
Quick view is possible only with still images.
Setting Quick View
1. Press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [OFF] : The quick view function can’t be
activated.
- [1 ~ 3 SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
All camera menu and function settings will be restored to their default values. However,
values for DATE/TIME, LANGUAGE, and the FREQUENCY will not be changed.
Initializing the Camera
1. Press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [RESET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [NO] is selected : Settings will not be restored to
their defaults.
- If [YES] is selected : All settings will be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
Initialization(RESET ALL)
SETUP
BEEP
FREQUENCY
Q.VIEW
1 SEC
BACK: SET:OK
SETUP
FREQUENCY
Q.VIEW
RESET
NO
YES
BACK: SET:OK