Samsung Digimax 202 - Manual (Page 29)

29
Self-timer( ) / Right button
[ Selecting the 10SEC self-timer ]
The default is OFF.
When taking a picture using the self-timer, the self-timer lamp works as follows:
10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the
first 7 seconds. It blinks at 0.5 second intervals for the
remaining 3 seconds.
2 second self-timer setting : The self-timer lamp blinks at 0.5 second intervals for 2
seconds.
If you operate the Power button, Mode dial and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
INFORMATION
Selecting the self-timer
1. Rotate the Mode Dial to select the desired recording
mode.
2. Press the SELF-TIMER button until the desired mode
indicator displays on the LCD monitor.
A 10 second, 2 second or Double self-timer icon
appears on the LCD monitor. In Movie Clip mode, only
the 10-second self-timer will work.
10SEC self-timer( ) :
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2SEC self-timer( ) :
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
Double self-timer ( ) :
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When
using the flash, the 2-second self-timer may be delayed
for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the specified time
has elapsed.