Samsung Digimax 202 - Manual (Page 21)

LCD monitor indicator
21
14 Image quality p.35~36
15 Image size 1600, 1024, 640 p.35
Number of available shots remaining 9
Remaining time 00:24 p.22
17 Digital Zoom rate X2.0 p.26
18 Digital zoom
Starting the recording mode
1. Insert the batteries (p.16). Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.19).
As this camera has a 6MB internal memory, you do not
need to insert the memory card. If the memory card is
not inserted, an image will be stored in the internal
memory. To expand memory capacity, insert a memory
card. If the memory card is inserted, an image will be
stored on the memory card.
3. Close the memory card cover.
4. Press the power button to turn on the camera. If the
date/time that is displayed on the LCD monitor is incorrect,
reset the date/time before taking a picture. (p.59)
5. Select the STILL IMAGE( ) mode by rotating the
mode dial.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
Recording a still image
If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
[ STILL IMAGE mode ]
16