Samsung Digimax 202 - Manual (Page 47)

47
Images can be displayed continuously at pre-set intervals.
Starting the slide show
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
3. Press the DOWN button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
- Slide Show Display Interval : OFF, 1~10SEC
5. Use the UP and DOWN buttons to select the Repeat
Slide Show menu.
- [ON] : Even once a cycle(from the first image to the
last image) is completed, the slide show will
continue to repeat itself.
- [OFF] : If a cycle is completed, the slide show will stop
automatically.
6. Press the OK button and the slide show will start.
- To pause the slide show, press the play & pause
button.
- To start the slide show again, press the play & pause button again.
- Press the menu button again and the slide show will stop.
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The auto power off function can't be activated.
While the slide show is playing, only the first frame of an AVI file is displayed.
INFORMATION
SLIDE
REPEAT
ON
OFF
OFF
SLIDE
REPEAT
ON
OFF
2 SEC
BACK: SET:OK