Samsung Digimax 202 - Manual (Page 60)

60
Imprinting date recording
There is an option to include DATE/TIME on still images.
Beep
If you set the operation sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, and if there is a card error, so that you can be aware of the
camera operation status.
Setting Operation Sounds
1. Press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [ON] is selected : The buzzer will sound.
- If [OFF] is selected : The buzzer will not sound.
Date Imprinting
1. Press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
date imprint type, and then press the OK button.
- [OFF] : The DATE & TIME will not be
imprinted on the image file.
- [DATE] : Only the DATE will be imprinted on the image file.
- [DATE&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute : Second] and hours are shown
using the 24 hour clock.
The imprint function is applied only to still images.
INFORMATION
SETUP
DATE
TIME
IMPRINT OFF
DATE
DATE&TIME
BACK: SET:OK
SETUP
TIME
IMPRINT
BEEP
ON
OFF
BACK: SET:OK