Samsung Digimax 202 - Manual (Page 51)

51
DPOF : Setting the Number of Copies to Print
This function allows you to embed print quantity information on your memory card.
This function is not available for Movie clips.
The DPOF file is only stored on the memory card.
Specifying the Number of Prints
1. Press the play mode button and press the MENU button.
2. Press the LEFT/ RIGHT button and select [DPOF].
3. Use the UP and DOWN buttons to select the desired
submenu, and then press the OK button. A window
where you can set the number of prints will open.
If [ONE PIC] is selected: Use the UP and DOWN
buttons to set the desired number of prints, and then
press the OK button. You can use the LEFT and RIGHT
buttons to set the number of prints for the previous or
the next picture. Press the SHUTTER button to switch to
Play mode.
If [ALL PICS] is selected: Use the UP and DOWN
buttons to set the desired number of prints, and then
press the OK button. The [PLEASE WAIT!] message
will be displayed and the Play mode screen will appear.
4. Once the DPOF setting is finished, the number of prints
will be displayed at the left side of the LCD monitor. The number of prints that can be set is
between 0 and 30.
If you select ‘0(zero)’, you can’t print an image.
DPOF(Digital Print Order Format) allows you to embed printing information on your
memory card. Select the pictures to be printed and how many prints to make.
(Print quantity : 0 ~ 30 )
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an
increasing number of photo laboratories.
DPOF
DPOF
ONE PIC
ALL PICS
EXIT:SHUTTER
MOVE PIC.: SET:OK
01 PRINTS