Samsung Digimax 202 - Manual (Page 61)

61
Frequency
The alternating current frequency influences the image quality.
If you don't select the same [FREQUENCY] sub menu as your nation's alternating current
frequency, there will be a line on a stored image. Should this be the case, change the
[FREQUENCY] sub menu.
Selecting frequency type
1. Press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FREQUENCY] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [FREQUENCY] sub menu : 50Hz, 60Hz
5. Press the menu button twice and the menu will disappear.
60Hz : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
50Hz : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
INFORMATION
SETUP
IMPRINT
BEEP
FREQUENCY
50Hz
60Hz
BACK: SET:OK