Samsung Digimax 202 - Manual (Page 30)

30
+/- button
You can use the +/- button to adjust the values for the exposure compensation.
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure
value by using the +/- button. In a recording mode with the
exception of MOVIE CLIP mode, the exposure compensation can
be adjusted between -2.0EV and +2.0EV (at 0.5EV increment).
Compensating Exposure
1. When you press the +/- button, the exposure
compensation menu bar and the exposure
compensation icon ( ) will appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor ( Ev).
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure
indicator ( ) will be displayed on the bottom of the
LCD monitor.
A negative exposure compensation value reduces the exposure. Note that a positive
exposure compensation value increases the exposure and the LCD monitor will
appear white or you may not get good pictures.
INFORMATION