Samsung SPR-7416 - Manual (Page 21)

3-1 3-1
Hardware [External monitor]
Description
• The external monitor function is to transmit the image displayed on DVR monitor by using
a general analogue monitor(TV, general monitor).
• You can print the images as sequentially converting the images from the camera from 1 to
16 according to the designed time(sec.) or as the split screen system.
• The images from a given camera can be transmitted to an external monitor as detecting
the monitors of images of a camera.
• The images from a given camera can be transmitted to an external monitor as detecting
the motion of images of a camera.
• Press the right button of a mouse on the image screen of the camera to be transmitted to
an external Monitor on the monitoring screen, and you can transmit the relevant image to
an external monitor.
Description
Select Camera
: Choose the camera which will produce output by external monitor.
The output will be automatically produced according to setup time.
When button is pressed: Appropriate camera is selected
When button is not pressed: Appropriate camera is not selected
Select time(S)
: The output from external monitor should be assigned in second (From 1 sec to 10 sec)
Each camera’s image will be displayed by rotation for the designated time (sec).
Input Sensor No.
: The image will be displayed onto external monitor when the linked sensor detect signal.
Input Camera No.
: The image will be displayed onto external monitor when the camera detects movement.
Out time by event
: Setup the duration to display onto external monitor when linked sensor or linked motion
detect signal or movement.
(1 sec ~ 10 sec is available, factory value is 2 seconds.)
External Monitor
: Select the image display mothed to be transmitted to an external monitor.
Quad mode : Display the image to be transmitted monitor as the split images.
Automatic Selection : Display the selected camera sequentially on an external monitor
during the time setting.
[Note]
• The same image is displayed on external monitor 2 as on Main monitor(VGA)
Environment Setup
[Note]
• When you install the system and the quality is bad on the external monitor please refer to chapter
11 (how to control external monitor output quality) in the manual.
[Notice]
External moniter setup function only can be applied to external monitor output 1, not external monitor output 2.
When try to install external monitor through external monitor output connectors on the board, please refer to
5-11. External monitor 2 output quality control
[Note]
• For the SPR-7116 Model, the external monitor connector on IO board is not operational, The
external monitor connector on display board must be used.