Samsung SPR-7416 - Manual (Page 22)

2
System
System [System information]
Description
VIEW code
: Default is set to 100-001
The value may change at your discretion but anything must be inputted.
When connecting from SPR Smart Viewer(Remote) to SPR Smart View(DVR), it
simultaneously searches and compares site code and Password. If either site code or
password is wrong, then the connection will not be made.
Location
: Input name of place where system is installed
Version
: Displays the version of installed SPR Series DVR program.
3-2 3-2
Model
: Contains information of program
Distributor
: Input name of installer
Other
: Input additional information for the system.
Note
: Input information related to system repairing.
Language
: Input information related to system repairing.
Example) Select one of the languages that you want to use such as Korean, English,
French, Chinese, Italian, Spanish and German, and press [Save].
In the multi-language supports function, select a language, and convert to a monitoring
screen.
Then, the language that you select is applied to the sysem.
DVR ADDRESS
: DVR address shall be entered to control DVR by keyboard by interlocking DVR and
SCC-2000 key board.
It is available to enter 0 ~ 255 for DVR address.
In case of controlling the DVR by using SSC-2000 keyboard, SSC-2000 keyboard
should be connected by each number set in DVR address. For further information of
SSC-2000 keyboard, please refer to the product manual of SSC-2000 keyboard.
Environment Setup