Samsung SPR-7416 - Manual (Page 24)

3-2 3-2
Media list
: Choose backup data to record backup media
It can be added up to 8 from media list and if fail to record on initially setup media, it will
automatically back up to next media.
Selection should be made as following: HDD, CD-RW, removable drive, Network drive
except floppy disk, etc. It supports almost every language oriented logical/physical
media.
You can select remote drive using IP address.
Up/Down/Delete
: Priority of backup media can be move from down/Up, and it can delete media that’s
already setup.
Add media
: Backup data can add media which will be recorded
Backup media can be added maximum of 8
Setup
Overwrite mode : This function will record data after deleting old data when there is not
enough space available to backup the data
Priority : Assign priority of backup data
Backup after precedent backup : Wait until the current work is done; start the backup
after current backup and waiting data have finished their backup.
Backup after current backup : Start after current work is done; when current data’s
backup is completed, do not backup the waiting data if the other data was selected first.
Add
: Add designated backup to backup schedule list
Method to select backup media
Local drive
You can select HDD or removable drive (MOD, DVD-RAM, ZIP, USB HDD etc), CD-
RW, and Network drive.
It supports every drive language oriented logical/physical media.
Remote drive
: Using IP address, this is used when backup from remove area where SPR Smart Viewer
S/W is installed
In order to backup from remote area using IP address, remote PC or File Server must
have SPR Smart Viewer S/W installed, and Remote Backup Server program (provided
when SPR Smart Viewer S/W is installed) should be executed (refer to Manual for SPR
Smart Viewer Program)
In order to do remote backup setup, IP address and password located by remote PC or
file server should be the same and remote backup server program should be executed
Environment Setup