Samsung SPR-7416 - Manual (Page 57)

5-3
Appendix
5-2
• After the CD is completely formatted, the following window will appear.
(Click on the “Confirm” button to complete formatting.)
• After the CD is completely formatted, continue backup by the same method as those of the
hard disk or movable drives (DVD-RAM, ZIP, MOD, ORB, etc.)
• If a different message from the above i displayed, refer to InCD manual.
[Notice]
• To format a CD using InCD S/W, only CD-RW media shall be used. It is impossible to
format CD-R media using InCD S/W.
• The operating method and the setting screen differ by InCD S/W versions.
3
Serial cable connection (input)
[Function of RS-232 Serial connection]
• Enables Sensor function
• Enables Control function
• Enables P/T/Z function
• Enables Watch Dog function
• Enables External monitor output function (Depends on model)
[Notice]
Serial Cable must appropriately connected to COM1 Port and RS-232 in order to use the function
above.
Control and Sensor, part of the product which is not supported by P/T/Z may not include Serial
Cable. Connection will be provided only for the product that supports control and sensor.
If Serial Cable is not connected appropriately, system may not operate properly and even damage
the system. Also, it may not recovered automatically.
(Product which is not supported by Control and Sensor, P/T/Z function uses its own auto recovery
function.)
ON OFF 1 2 3 4
Connect to COM 1
Port
(9 PIN)
RS-232C Port