Samsung SPR-7416 - Manual (Page 66)

Appendix
5-10
Channel selection
: If you select [ ] button, the screen shown as below shall be displayed.
If you select camera button, the picture of the selected camera shall be displayed on the screen
in full size from SPR Smart View screen. If you select the selected camera button again, the screen
shall return to the previous screen.
If you select [ ] button, the screen shall be changed over to DVR control screen.
DVR control mode close
: If you select [ ] button, you can exit from the DVR control DVR.
SPR-7116
0 0 1
0 0 0
DVR Control Screen (Search mode)
SPR-7116
0 0 1
0 0 0
Zoom
Panorama
4div.
9div.
16div.
Configuration of Control Screen
4 division screen
: If you select [4div] button from the surveillance screen, the search camera shall be selected by
4 channel unit.
9 division screen
: If you select [9div] button from the surveillance screen, the search camera shall be selected by
9 channel unit.
16 division screen
: you select [16div] button from the surveillance screen, the search camera shall be selected by
16 channel unit.
Panorama
: When you search the picture after selecting one camera, this function shows the selected pictures
on each division mode in sequence.
Zoom
: If you select [Zoom] button, the captured pictures can be enlarged or reduced. In addition, this
function provides 5 steps of picture enlargement.
5-10