Samsung SPR-7416 - Manual (Page 4)

[ Please check these out before using the system.]
Avoid any place that has high moisture, dust or black dirt.
Avoid any place that has direct sun light or heat. High temperature is not good for the
product.
Keep product away from a electric shock or magnetic substance.
Avoid high or low temperature.(Recommended temperature is 5 °C ~33°C)
Be careful not to drop any conducting material into the ventilation hole.
Turn off the system before installation.
Ensure enough space for the cables at the rear of the system.
Avoid any place that may shake the product.
Use the product in areas where it ventilates well.
Radio, TV or Radio devices might be harmful to the system.
Don’t disassemble the system on your own.
Do not put any heavy objects on top of the product.
This device designed to operate under Max. 33°C. When you install this device in the rack,
please consider the Max. ambient temperature. Please install this device Proper ambient
temperature of all park.
CAUTION : When you install this device in the rack, the operating ambient temperature may
be greater than room ambient. Please consider this condition and simulate the Max.
Temperature and install in an environment Compatible temperature.
Reduced Air Flow : Installation of this device in a rack should be such that the amount of air
flow required for safe operation of this device is not compromised. Please provide enough
space to get the proper air flow.
Mechanical Loading - Mounting of this device in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
Circuit Overloading : Please read the rating in the nameplate and consider appropriate power
supply and supply wiring.
When you are using like a power strips except direct connections to the branch circuit, please
make sure to connect reliable earthing maintained.
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Notice before installation Notice for Safety
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace
Only with the same or equivalent type recommended by the manufacturer.
Dispose of user batteries according to the manufacturer’s instructions
This is for the safety of customer’s property and life. Please read carefully and
follow the direction.
Warning / Notice
Make sure to turn off the system before you
install and do not use many plug in one
socket.
• It can cause overheat, fire or electric shock.
Do not bend power cable too much or let
it peeled.
• It might cause fire.
Do not locate in the area where high
humidity or dust exist.
• It might cause electric shock or fire.
Please make sure the systems is located in
a clean area and make it dried.
Do not use wet towel or chemical product
to clean the system.
• It might hurt the surface of the product or
cause trouble and electric shock.
Do not put glass with water, coffee or drink
on the product.
• Any spilt drink can cause problem in the
product.
Message for problem
that might cause death
or serious casualty. Message for problem
that might cause hurt or
damage to property.
Warning Notice
Warning
Do not plug out the power cable by grabbing
with wet hands or too much force. Do not plug
in if the socket is loose.
• It might cause fire or electric shock.