Samsung SPR-7416 - Manual (Page 65)

16 division screen
: If you select [16div] button from the surveillance screen, the screen shall be changed over to 16 division
screen.
Sequence changeover
: If you select [Rotate] button from 4 division or 9 division mode, the screen shall be changed to the
selected division mode in sequence.
Search mode changeover
: If you select [Search] button, the password input screen shall be displayed from SPR Smart View
screen.
Enter the password from the password input screen and select [OK] button, the screen shall be changed
over to the search mode screen.
Emergency Recording
: When the emergent recording is needed while monitoring, if you select [Emergency Rec] button, you
can record all cameras regardless of the schedule. If you want to release the recording, select
[Emergency Rec] button again and enter the password from the password input screen and then select
[OK] button.
Alarm release
: This function is to force to stop the alarm output, when an alarm sounds in DVR.
Environment Setting
: If you select [ ] button to set the system, the password input screen shall be displayed for the
system security.If you enter the password from the password input screen and select [OK] button, the
screen shall be changed over to the system setting screen.And LCD screen of SSC-2000 keyboard
shall be changed over to the screen as below.
For direction button or [ENTER] button, you can use the direction button and [ENTER] button or Joystick of SCC-
2000 keyboard by moving them up/down/left/right and even use AF (Auto Focus) button.
If you select [ ] button, the screen shall be changed over to DVR control screen.
5-10
Appendix
5-10
10
DVR CONTROL BY
SSC-2000 KEYBOARD
1. After selecting [DVR] button from SSC-2000 system keyboard, enter DVR No. (0~255)
of SPR Smart View which is interlocked with SSC-2000 keyboard by using the numeric
keys and then press [ENTER] button.
SPR-7116
0 0 1
0 0 0
Search
Emergency Rec
Alarm Off
Rotate
4div.
9div.
16div.
DVR Control Screen (Surveillance mode)
Configuration of Control Screen
DVR No.
: This displays the no. of DVR connected to SSC-2000.
Model No.
: This displays the model no. of DVR connected to SSC-2000.
Monitor No.
: This displays the no. of monitor connected to SSC-2000. This is not used when controlling
the DVR.
4 division screen
: If you select [4div] button from the surveillance screen, the screen shall be changed
over to 4 division screen.
9 division screen
: If you select [9div] button from the surveillance screen, the screen shall be changed
over to 9 division screen.