Samsung CLP 500N - Manual (Page 135)

M AINTAINING Y OUR P RINTER 6.17
6
7 Take a new imaging unit out of the package using the
handle.
8 Remove the paper covering the imaging unit by removing
the tape under the handle of the imaging unit.
C AUTIONS :
• Don’t use sharp objects, such as a knife or scissors, to open the
imaging unit package and tape on the protective paper liner. You
could damage the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with black paper, if necessary.
• Close the top and left cover should the setup need to be halted
for any reason.
• Do not touch the surface of the green roller on the imaging unit
or print quality problems can occur.
9 Locate the imaging unit slots inside the printer, one on each
side.