Samsung CLP 500N - Manual (Page 19)

S ETUP G UIDE 19
English
Step 5.
Connecting a Printer Cable
You need to connect your printer to the computer with either a
parallel interface cable or a Universal Serial Bus (USB) cable.
Using a Parallel Cable
N OTES :
• The parallel port may not be available depending on your
country.
• To connect the printer to the parallel port of the computer
requires a certified parallel cable. You need to buy a IEEE1284
compliant cable that is within 3m in length.
1 Make sure that both the printer and the computer are
turned off.
2 Plug the parallel printer cable into the connector on the
back of the printer.
Push the metal clips down to fit inside the notches on the
cable plug.
3 Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
See the User’s Guide of your computer, if you need help.
To the parallel port on
your computer