Samsung CLP 500N User Manual
Page 184
S
OLVING
P
ROBLEMS
7.28
Load
[Size] In Tray1
OR
Load
[Size] In Tray2
The paper size specified
in the printer properties
does not match the
paper you are loading.
Load the correct paper in the tray.
Load Manual
Press Cont Key
It is waiting user’s
action to print from the
manual feeder with
paper.
Load a sheet of print material and
press the On Line/Continue
button. You need to press the
button for each page to be printed.
Main Motor
Error
A problem has occurred
in the main motor of the
printer.
Unplug the power cord and plug it
in again. If the problem persists,
please call for service.
Memory Overflow
The printer does not
have enough memory to
print the current job.
An error has occurred in
the firmware program of
the printer.
The job automatically clears and
the printer returns to Standby
Mode.
• Expand the memory in your
printer. See “Installing Printer
Memory” on page C.2.
Paper Empty
[Size] In Tray1
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
The paper tray has run
out of papers.
Load paper in the paper tray. See
page 3.4.
Page Too Complex
Too much complicated
data was sent to the
printer.
Simplify the page layout and
remove unnecessary graphics from
your document.
To expand the memory in your
printer, see “Installing Printer
Memory” on page C.2.
Ready [Color]
Low Toner
The corresponding toner
cartridge in your printer
is nearly empty.
Redistribute the toner in
corresponding toner cartridge,
referring to page 6.5.
Ready
IP Conflict
An IP address conflicts
with only other devices
on the network.
Contact your network
administrator and choose an
address within your subnet which
will not conflict with any other
devices.
Message
Status
Do this...