Samsung CLP 500N - Manual (Page 185)

S OLVING P ROBLEMS 7.29
7
Replace [Color]
Toner The corresponding toner
cartridge in your printer
is empty. Replace the corresponding toner
cartridge with a new one. See
page 6.8.
Replace
Imaging Unit The lifetime of the
imaging unit is ended. Replace the imaging unit with a
new one. See page 6.14.
Replace Imaging
Unit Soon The lifetime of the
imaging unit is nearly
ended. When “Replace Imaging Unit”
appears on the display, replace the
imaging unit.
Replace MP
Pick-roller The lifetime of the MP
pickup roller is ended. Contact a service representative.
Replace
Transfer Belt The lifetime of the
transfer belt is ended. Replace the transfer belt with a
new one. See page 6.22.
Replace Transfer
Belt Soon The lifetime of the
transfer belt is nearly
ended. When “Replace Transfer Belt”
appears on the display, replace the
transfer blet.
Replace
Transfer Roller The lifetime of the
Transfer Roller is ended. Contact a service representative.
Replace Transfer
Roller Soon The lifetime of the
Transfer Roller is nearly
ended. When “Replace Transfer Roller”
appears on the display, contact a
service representative.
Replace Tray1
Pick-roller The lifetime of the Tray1
pickup roller is ended. Contact a service representative.
Replace Tray2
Pick-roller The lifetime of the Tray2
pickup roller is ended. Contact a service representative.
Transfer Belt
Error The transfer belt is
either not working or
not correctly installed in
the printer. Replace the transfer belt.
OR
Make sure the installed transfer
belt is properly seated.
Tray2 Error Optional Tray2 is not
properly installed or
connected to the printer. After turn the printer off and then
back on, reinstall the optional
tray2. If the message persists,
contact a service representative.
Tray2 Jam
Cover Open Tray2 jam cover is open. Close Tray2 cover firmly.
Waste Motor
Error A problem has occurred
in waste toner motor. Contact a service representative.
Waste Toner Tank
Full/Not Install The waste toner
container is full. Replace the waste toner container
with a new one. See page 6.11.
Message Status Do this...