Samsung CLP 500N - Manual (Page 62)

U SING THE C ONTROL P ANEL 2.12
Network Menu
This menu lets you configure the network interface card
installed in your printer according to how the network is set up.
You can upgrade the firmware of the network interface card, and
print the configuration.
N OTE : This menu only appears when a Network Card is fitted
(CLP-500N or CLP-500 with optional Network card).
(*: the default setting)
Item Explanation
Config Network
Sets whether or not you want to
configure the network.
If you select Yes , you can configure the
TCP/IP and Netware menus.
If you select Yes , the following options
are available: Config TCP , Netware
and Config Netware .
Config TCP
Select whether you want to set the IP
address or not.
If you select Yes, you can configure IP
address item.
If you select Yes , the following options
are available: IP Get Method , IP
Address , Subnet Mask and
Gateway .
IP Get Method
You can set this item only when you set
the
Config TCP to Yes .
• Static: You can enter IP address,
subnetmask, and gateway manually.
• BOOTP: The BOOTP server allots the
IP address to you automatically.
• DHCP: The DHCP server allots the IP
address to you automatically.
Options: Yes, No*
Options: Yes, No*
Options: Static*, BOOTP, DHCP