Samsung CLP 500N - Manual (Page 21)

S ETUP G UIDE 21
English
For Networking Printing
You can attach your CLP-500 or CLP-500N printer to a network
using an Ethernet cable (UTP cable with RJ.45 connector).
CLP-500N has a built-in network interface card. If you are a
CLP-500 user, you need to install an optional network interface
card.
If you want to use the printer in both a wired and a wireless
network environments, you need to install an optional wired/
wireless network interface card. For details about installing the
card, see the User’s Guide of your printer in the CD-ROM.
Using an Ethernet cable
1 Make sure that both the printer and the computer are
turned off.
2 Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3 Plug the other end of the cable into a network LAN
connection.
For details about installing the network card, see the User’s
Guide of your printer in the CD-ROM.
To the network
LAN connection