Samsung CLP 500N User Manual
Page 213
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
B.11
B
Take the following steps to change the frame type format:
1
In ready mode press the Menu button (
) until you see
‘Network’ on the bottom line of the display. Press the Enter
button (
) to access the menu.
2
Press the Enter button (
) when ‘Config Network’ displays
on the bottom line.
3
Press the scroll button (
or
) to display ‘Yes’ on the
bottom line. Press the Enter button (
).
4
Press the Upper Level button (
).
5
Press the scroll button (
or
) until ‘Netware’ displays
on the bottom line. Press the Enter button (
).
6
Press the Enter button (
) when ‘On’ displays.
7
Press the Upper Level button (
), then use the scroll
button (
).
8
Press the Enter button (
) when ‘Config Netware’
displays.
9
Press the scroll button (
or
) to display ‘Yes’ on the
bottom line. Press the Enter button (
).
10
Press the Upper Level button (
), then use the scroll
button (
).
11
Press the Enter button (
) when ‘IPX Frame Type’
displays.
12
Press the scroll button (
or
) until you see the desired
frame type and press the Enter button (
).
13
Press the On Line/Continue button (
) to return to
ready mode.