Samsung CLP 500N - Manual (Page 63)

U SING THE C ONTROL P ANEL 2.13
2
IP Address
You can select this item only when you
set
IP Get Method to Static . This item
lets you enter the IP address manually.
Press the scroll button to set the value of
the 1st byte between 1 and 255, and
then press the
Enter button.
Set the value for the 2nd to the 4th byte
the same way.
Subnet Mask
You can set this item only when you set
IP Get Method to Static . This item lets
you enter the subnet mask manually.
Press the scroll button to set the value of
the 1st byte between 1 and 255, and
then press the
Enter button.
Set the value for the 2nd to the 4th byte
the same way.
Gateway
You can set this item only when you set
IP Get Method to Static . This item lets
you enter the gateway manually. Press
the scroll button to set the value of the
1st byte between 1 and 255, and then
press the
Enter button.
Set the value for the 2nd to the 4th byte
the same way.
Config 802.11b
Configure the Wireless Network
environments.
If you select Yes, the following options
are available : SSID, Operation Mode,
Channel, Authentication, Encryption,
Using Key, KeyType and Key.
See “Configuring the Wireless Network”
on page B.12
Note: This menu only appears when a
Wireless Network interface Card is fitted.
Item Explanation
Values: Yes, No*