Samsung CLP 500N - Manual (Page 22)

S ETUP G UIDE
22
Using a network antenna
1 If you install the wired/wireless network card, you can use
your printer in wireless environment.
For details about installing the wired/wireless network card,
see the User’s Guide of your printer in the CD-ROM.
N OTE : After connecting the printer you need to configure the
network parameters on the control panel. See the User’s Guide of
your printer. You can use the software supplied with the card.
Refer to the software User’s Guide.
Step 6.
Turning the Printer On
1 Plug the power cord into the power receptacle on the back
of the printer.
2 Plug the other end into a properly grounded AC outlet and
turn on the power.
C AUTIONS :
• Some parts inside of the printer may be hot when power is on or
after printing. Be careful not to burn yourself when working
inside the printer.
• Do not disassemble the printer when it is powered on. Doing so
may give you an electric shock.
2
1