Sony STR-DA7100ES - Manual (Page 108)

108 GB
Selecting a component
Do the procedure below to select a component
from the input list.
1
Press INPUT SELECTOR.
The input list appears. The items in the
list correspond with the jacks on the
receiver.
2
Move the easy scroll key to
select a component from the
list, then press the key to enter
the selection.
Information about the component appears
in the display window.
Tips
• You can modify the category indication. The
category indication tells you what component is
actually connected to the jacks on the receiver. If a
component is connected to jacks for which they are
not originally meant, you can modify the category
indication to match the component. For details, see
“Programming the remote” on page 113.
• You can set the remote to automatically turn on a
component when it is selected from the function
list. For details, see “Using the auto power
function” on page 119.
• You can customize the input list.
If you selected the tape deck
Move the easy scroll key to select deck A or B.
Note
When the remote is programmed to control a non-
Sony tape deck, tape deck A and B may not switch.
Basic procedure for selecting a
component