Sony STR-DA7100ES - Manual (Page 77)

77 GB
Ampl
ifier O
p
e
ration
3
Move the easy scroll key to
select “FM/AM,” then select FM
or AM by pressing the key.
Each time you press the easy scroll key,
the band switches to FM or AM.
You can also use FM/AM on the receiver.
4
Move the easy scroll key to
select “DIRECT TUNING” from
the SUB menu, then press the
key.
“0” flashes on the display window.
5
Press > on the remote
repeatedly until the NUM menu
appears, then select the
numbers for the frequency,
then press the key.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 b 0
(You do not have to enter the last “0”
when the tuning scale is set to 100 kHz.)
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
(You do not have to enter the last “0”
when the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right
frequency. If not, repeat step 4. If the entered
numbers still flash, the frequency is not used in
your area.
Storing FM stations
automatically
(AUTOBETICAL)
(Models of area code CEL only)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations.”
1
Press ?/1 to turn off the
receiver.
MEMORY/ENTER
1,2
continued