Sony STR-DA7100ES - Manual (Page 72)

72 GB
* Refer to the following table.
The video input/output conversion table classified by menu setup of VIDEO
CONVERT, PROGRESSIVE OUT
a : BRIGHTNESS/COLOR/HUE adjustment is possible.
f : Video signals are not converted and are output directly.
X : Video signals are not output correctly.
Note for models of area code CEL only
A video conversion circuit is not compatible with component video signals of more than 480i/576i.
** Each video input can be adjusted independently for every INPUT SELECTOR. The adjusted value is held
until the memory of this receiver is cleared. The adjusted value is retained, even if the power is turned off
or the power cord is pulled out.
NAME IN?
(Naming inputs) Lets you set the name of inputs selected. For details, see “Naming
inputs” on page 60.
Menu item Parameter Explanation
CUSTOMIZE menu
setting Input signal MONITOR OUT
VIDEO S-VIDEO COMPONENT
VIDEO
VIDEO CONVERT:
ON /
PROGRESSIVE
OUT: ON VIDEO/S-VIDEO a a a (480p/576p)
COMPONENT VIDEO
(480i/576i) a a a (480p/576p)
COMPONENT VIDEO
(Other than 480i/576i) X X X
CUSTOMIZE menu
setting Input signal MONITOR OUT
VIDEO S-VIDEO COMPONENT
VIDEO
VIDEO CONVERT:
ON /
PROGRESSIVE
OUT: OFF VIDEO/S-VIDEO a a a (480i/576i)
COMPONENT VIDEO
(480i/576i) a a f
COMPONENT VIDEO
(Other than 480i/576i) X X X
CUSTOMIZE menu
setting Input signal MONITOR OUT
VIDEO S-VIDEO COMPONENT
VIDEO
VIDEO CONVERT:
OFF /
PROGRESSIVE
OUT: Dimmed in the
display VIDEO f X X
S-VIDEO X f X
COMPONENT VIDEO
(480i/576i) X X f
COMPONENT VIDEO
(Other than 480i/576i) X X f