Sony STR-DA7100ES - Manual (Page 53)

53 GB
G
e
tting Star
te
d
4
Move the control key b to select
“AUTO.”
The test tone is output from each speaker
in sequence.
Also, if you press
b , the pattern will
become the “FIX” pattern in, which the
test tone is output from the selected
speaker only.
5
Adjust the speaker level and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details on the LEVEL menu settings,
see page 99.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote
or turn MASTER VOLUME on the receiver.
• You can also use +/– on the receiver for the
adjustment.
6
Press the control key V/v
repeatedly to select “TEST
TONE.”
7
Move the control key B to select
“OFF.”
The test tone turns off.
8
Press ON SCREEN.
The menu setting display disappears.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Set “MENU EXPAND” in the CUSTOMIZE
menu to “ON” (page 67). Then select the two
speakers you want to adjust using “PHASE
NOISE” or “PHASE AUDIO” on the LEVEL
menu (page 100).
To operate on the receiver
When you operate using the receiver, be sure
to perform the following procedure.
1
Turn on this receiver.
2
Turn MAIN MENU to select
“LEVEL.”
3
Turn MENU to select “TEST
TONE.”
4
Turn +/– clockwise to select
“AUTO.”
The test tone is output from each speaker.
5
Turn MENU to select a speaker
you want to adjust.
6
Turn +/– to adjust the
parameter.
Adjust the speaker level and balance so
that the level (volume) of the test tone
sounds the same from each speaker.
Repeat step 5 and 6 to adjust the volume
of each speaker.
7
Turn MENU to select “TEST
TONE.”
8
Turn +/– counter-clockwise to
select “OFF.”
1
2
3,5,7
4,6,8