Sony STR-DA7100ES - Manual (Page 92)

92 GB
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no L.F.E. signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However the low frequency signal is
not generated for “Neo:6 Cinema” or “Neo:6
Music” when all speakers are set to “LARGE.”
Notes
• This function does not work in the following cases.
– MULTI CH IN is selected
– The DSD signal is received via i.LINK
• DTS Neo:6 does not work for DTS 2CH audio, the
sound is played as 2 channel.
• If you set up the sound field during DTS 96/24
signal reception, it will play back only at 48kHz.
Tip
Only Dolby prologic IIx decoding is effective, when
a multi channel signal is input.
At this time, the setup of SB DECODING/SB DEC
MODE in CUSTOMIZE menu becomes invalid.
When you select decoding modes other than Dolby
prologic IIx, multi channel sound (being encoded) is
output.
Selecting a sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s
preprogrammed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
Press MOVIE repeatedly to select
the sound field you want.
The sound field list appears.
Types of sound field available
x CINEMA STUDIO EX A DCS
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater” cinema production studio. This is a
standard mode, great for watching almost any
type of movie.
x CINEMA STUDIO EX B DCS
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater” cinema production studio. This mode
is ideal for watching science-fiction or action
movies with lots of sound effects.
x CINEMA STUDIO EX C DCS
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage.
This mode is ideal for watching musicals or
Selecting a sound field for
movies
MOVIE