Sharp XE-A303 User Manual
Page 22
20
9. Registration type programming (Press
s
to skip. / Press
A
to terminate.)
10. Group No. programming (Press
s
to skip. / Press
A
to terminate.)
11. Entry digit limit programming (Press
s
to skip. / Press
A
to terminate.)
LIMIT DIGITS
06 7
7
(1) Enter entry digit limit using numeric key.
The entry digit limit can be set up to 8.
Default setting is 8.
LIMIT DIGITS
06 8
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
GROUP NO.
06 1
1
(1) Enter a group no. for the department using numeric
keys.
Choose a group from groups 1 to 9 for normal
positive department, group 10 for negative normal
department, group 11 for positive hash department,
and group 12 for negative hash department.
Default setting is group 1 for dept. code 1 to 20 and
22 to 99, and group 10 for dept. code 21.
GROUP NO.
06 01
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the registration type does not need
to be changed from "NORMAL". Otherwise, press
:
key to display "SICS".
Each time
:
key is pressed, the display shows
"SICS" and "NORMAL" alternately.
Choose "SICS" for single item cash sale and
"NORMAL" for normal sale.
Default setting is "NORMAL".
If an entry of a department programmed for SICS is
made first, the sale will be finalized as a cash sale
as soon as the department key is pressed. If the
entry is made after entering a department not
programmed for SICS, the sale will not be finalized
until the
A
key is pressed.
A303_1(En) 06.7.22 9:20 AM Page 20