SIGMA SQC-122c - Manual (Page 41)

Chapter 3 Menus
3-8
The second Process Menu shows the sequence of layers that will be deposited in the
current process.
Main Screen Returns to the Main Menu.
Prev
Menu Returns to the Process Select Menu.
Edit Displays the Layer Edit Menu for the highlighted layer (see
next page).
Cut /
Paste Used to develop the sequence of layers in a process. The
highlighted layer may be Cut (removed from the process) or
Copied to the clipboard. The layer on the clipboard can then
be Pasted anywhere in the list of layers.
Insert
Layer Shows the list of 25 films. Select a film, then press Enter to
insert the film as a new layer.
Control Knob Scrolls through the list of layers in the Layer Select Menu, and
through the list of films in the Insert Layer mode. When
pressed, begins editing of the highlighted layer.
Layer Select Menu
Layer
My Process 2 -> Layer 2 -> Aluminum
Cut /
Paste
Edit
Prev
Menu
Main
Screen
Layer 1
Layer 2
THICKNESS(kA)
0.000
POWER(%)
0.0
RATE(A/s)
0.0
Insert
Layer
Film
AluminumOxide
Aluminum