SIGMA SQC-122c - Manual (Page 54)

Chapter 3 Menus
3-21
3.7 I/O Setup
The I / O Setup SoftKey displays a menu allowing you to map the eight digital inputs
and the eight digital outputs.
I / O Mapping Menu
Parameter
My Process 1 -> Layer 1 -> Aluminum
Edit
Prev
Menu
Exit to
Main
Input 1
THICKNESS(kA)
0.000
POWER(%)
0.0
RATE(A/s)
0.0
Value
None
Input 2 None
Input 3 None
Input 4 None
Input 5 None
Input 6 None
Input 7 None
Input 8 None
Relay 1 None
Relay 2 None
Relay 3 None
Exit to Main Returns to the Main Menu.
Prev Menu Returns to the System Parameters Menu.
Edit Selects the highlighted parameter for edit. SoftKey functions
change to:
Next: Store parameter and move to next for editing.
Cancel: Stop editing and undo changes to selected parameter.
Enter: Stop editing and save value for selected parameter.
Control Knob: Turn to adjust value. Push to store value and
move to next parameter.
Control Knob Scrolls through the list of inputs and relays.