Sun Microsystems 2000E - Manual (Page 21)

Power Supply Installation 2-5
2
2.5.2 Installing the Supply
2.5.2.1 Preparation
1. Remove the power supply compartment EMI panel Part No. 340-3134-xx
covering both power supplies. See Figure 2-3.
Remove twelve 10-32 screws securing the panel in place and set aside.
Figure 2-3 Removing the Power Supply Compartment EMI Panel
2. Disconnect the top power supply power cord.
This is in the lower-center of the top supply. See Figure 2-4.
Screws