Sun Microsystems 2000E - Manual (Page 46)

A-4 SPARCserver 2000E Power Supply Installation Manual—April 1995
A
3. Lift the panel up until free of the tabs at the top of the chassis.
Set the panel aside.
Figure 1-3 Removing the Side Panels
A.1.4 Removing the EMI Shield
The EMI shield is located behind the front panels.
1. Remove the Phillips screws securing the EMI shield to the chassis.
See Figure 1-4.
2. Grab the handle at the panel top to tilt the panel out to remove it.
Captive screws
Side panel
Chassis tab s
Panel notches