A.2.3 vented front panel, A.2.4 side panels, Tighten the two captive screws at the panel base – Sun Microsystems 2000E User Manual
Page 49
Advertising
Access
A-7
A
A.2.3 Vented Front Panel
♦ Place the panel against the chassis with ball studs aligned with catches on
the panel.
At both ends, tap or press the panel into place.
A.2.4 Side Panels
1. Place the panel against the cabinet so the notches on the panel inside
align with tabs at the chassis top.
2. Lower the panel into place and allow it to hang flush against the chassis.
3. Tighten the two captive screws at the panel base.
Advertising