Sony XDCAM PDW-1500 - Manual (Page 115)

Ch
apt
er 8
Men
u
s
115
8-4 Maintenance Menu
For details of how to make settings, see “To change
network settings” (page 117).
SUBNET MASK PRESET Set the subnet mask.
255.255.255.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the subnet mask.
DEFAULT GATEWAY PRESET Set the default gateway.
000.000.000.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the default gateway.
LINK SPEED Set the communications speed.
AUTO, 10Mbps, 100Mbps, 1000Mbps
DUPLEX Set the communications method.
AUTO, Full (Full Duplex), Half (Half Duplex)
NETWORK CONFIG: items relating to network settings
Item Setting
SETUP MAINTENANCE: items relating to the setup menu
Item Setting
EXTENDED MENU Select whether or not to display the extended menu.
DISABLE: Do not display.
ENABLE: Display.
SETUP BANK4 Select the bank to be stored in menu bank 4, or reset menu bank 4.
Cur to 4 (CURRENT TO BANK4): Store the current menu settings in menu bank 4.
1 to 4 (BANK1 TO BANK4): Store the menu bank 1 settings in menu bank 4.
2 to 4 (BANK2 TO BANK4): Store the menu bank 2 settings in menu bank 4.
3 to 4 (BANK3 TO BANK4): Store the menu bank 3 settings in menu bank 4.
Reset (RESET BANK4): Reset menu bank 4.
SAVE MENU DATA Select whether to temporarily back up (save) setup menu settings before operations such as
software upgrades.
SET button: Back up (save) the settings.
MENU button: Return to next highest menu level without backing up.
LOAD MENU DATA Select whether to restore (load) setting that were backed up (saved) with the “SAVE MENU
DATA” item.
SET button: Restore (load) the settings.
MENU button: Return to the next highest menu level without restoring.
AU BANK RECALL Select whether to recall settings automatically from a menu bank when the system is
powered on, and if so which menu bank to recall from.
off: Do not recall settings from a menu bank.
Bank1 (from BANK1): Recall settings from menu bank 1.
Bank2 (from BANK2): Recall settings from menu bank 2.
Bank3 (from BANK3): Recall settings from menu bank 3.
Bank4 (from BANK4): Recall settings from menu bank 4.
RESET ALL SETUP Reset the current menu settings to the factory settings.
SET button: Reset.
MENU button: Return to the next highest menu level without resetting.
Notes
• The line mode setting is also cleared. If you execute this item, reset the line mode (see
page 7).
• Date and time settings are not cleared, but the time zone setting is cleared. After executing
this item, reset the time zone (see page 34).