Sony XDCAM PDW-1500 - Manual (Page 67)

Chapt
er
5
S
c
ene
Se
lec
tion
67
5-3 Managing Clip Lists (CLIP Menu)
3
Use the F or f button or the jog dial to select the
desired clip list, and then press the g button
A confirmation message like the one shown below
appears.
4
Press the SET button.
The selected clip list is loaded into the unit memory as
the current clip list.
If an unsaved current clip list exists in the unit
memory
A warning message like the following appears.
“CLIP LIST IS NOT SAVED. OVERWRITE CLIP
LIST?”
Press the SET button to overwrite the unsaved current clip
list, or press the MENU button to quit without overwriting.
To display thumbnails of the sub clips in the
newly loaded current clip list
Press the SUBCLIP button, and then press the
THUMBNAIL button.
5-3-2 Deleting Clip Lists From a Disc
1
Display the CLIP menu.
See “To display the CLIP menu” (page 66).
2
Use the F or f button to move the cursor to DELETE,
and then press the g button.
A list of clip lists appears.
The date of creation or the title is displayed for each
clip list.
To switch between display of dates of creation,
titles, and clip list names
With the SHIFT button held down, press the SET
button.
With each press, the display changes as follows.
Dates of creation > titles > clip list names > dates of
creation ...
3
Use the F or f button or the jog dial to select the
desired clip list, and then press the g button.
A confirmation message like the one shown below
appears.
4
Press the SET button.
The selected clip list is deleted from the disc.
5-3-3 Clearing the Current Clip List
From the Unit Memory
This operation clears the current clip list, so that no clip list
is loaded in the unit memory.
1
Display the CLIP menu.
See “To display the CLIP menu” (page 66).
2
Use the F or f button to move the cursor to CLEAR,
and then press the g button.
A message like the one shown below appears.
3
Press the SET button.
The current clip list is cleared from the unit memory.
5-3-4 Presetting the Initial Time
Code of the Current Clip List
When the unit is powered on, and when you insert a new
disc, the initial time code of the current clip list is set to
LOAD E0002 OK ?
LOAD : SET KEY
TO MENU : MENU KEY
LOAD CLIP LIST
DELETE E0001 OK ?
DELETE : SET KEY
TO MENU : MENU KEY
DELETE CLIP LIST
CLEAR OK ?
CLEAR : SET KEY
TO MENU : MENU KEY
CLEAR CLIP LIST