Sony XDCAM PDW-1500 - Manual (Page 55)

Cha
p
te
r 4
Rec
o
rd
ing/
Pl
a
y
bac
k
55
4-2 Playback
3
Use the G or g button to select “OK,” and then press
the SET button.
All clips are locked, and you return to the thumbnail
screen.
To unlock all clips
Carry out the procedure in “To lock all clips,” selecting
UNLOCK ALL CLIPS in step 2.
Deleting clips
Notes
• Clips cannot be deleted when the Write Inhibit tab of the
disc is set to the recording disabled position, or when
extended menu item 310 “REC INHIBIT” is set to “on.”
• Locked clips cannot be deleted.
• When the target clip is referenced in a clip list, the clip
list that references the clip will also be deleted.
You can use the DISC MENU to delete the last clip or all
clips. For details, see page 120.
1
With the SUBCLIP button off, press the
THUMBNAIL button, turning it on.
The thumbnails of the clips on the disc appear.
2
Use the arrow buttons or the jog dial to select the clip
to delete.
You can select clips with the following operations.
Press the PREV or NEXT button: Move to the
previous or next clip.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last clip.
Press the F/f button with the SHIFT button held
down: Switch to the previous or next page.
3
With the SHIFT button held down, press the
SUBCLIP button. Or press the MENU button.
The THUMBNAIL MENU appears (see step 3 of
“Locking clips” (page 54)).
To escape from the THUMBNAIL MENU to the
previous screen
Press the RESET button.
4
Use the arrow buttons or the jog dial to select DELETE
CLIP, and then press the SET button.
Thumbnails of four frames in the target clip appear.
One of the following messages appears in a
confirmation dialog, depending on whether the target
clip is referenced in a clip list.
When the target clip is not referenced in a clip list:
“DELETE CLIP?”
When the target clip is referenced in a clip list:
“DELETE CLIP & CLIP LIST?” (The clip list that
references the clip will also be deleted.)
To go to the clip deletion screen without displaying
the THUMBNAIL MENU
After step 2, press the RESET button with the SHIFT
button held down (shortcut operation).
To cancel the deletion and return to the thumbnail
screen
Do one of the following.
• Use the
F or f button to select “CANCEL,” and then
press the SET button.
• Press the RESET button.
5
Use the F or f button to select “OK,” and then press
the SET button.
The clip is deleted and you return to the thumbnail
screen.
To delete all clips
1
Carry out steps 1 and 3 of “Deleting clips” to display
the THUMBNAIL MENU.
2
Use the arrow buttons or the jog dial to select DELETE
ALL CLIPS, and then press the SET button.
A confirmation screen appears.
To cancel the deletion and return to the thumbnail
screen
Do one of the following.
• Use the
F or f button to select “CANCEL,” and then
press the SET button.
• Press the RESET button.
3
Use the F or f button to select “OK,” and then press
the SET button.
All clips are deleted, and you return to the thumbnail
screen.