Sony XDCAM PDW-1500 - Manual (Page 129)

Chap
te
r
9
Maint
e
n
anc
e and
T
roub
les
h
o
o
ting
129
9-3 Alarms
a) With respect to setting of basic menu item 016
b) This appears from firmware version 1.4.
During reception of commands from an external device connected to the REMOTE connector
Non AV Full on, limit, off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space. Insert a different disc with enough free
capacity.
Index File!
b) on, limit, off An attempt was made to record to a disc
containing an unsupported index file. Exchange the disc for one that contains an
index file supported by this unit.
Alternatively, format the disc
(see page
39).
File System
b) on, limit, off An attempt was made to record to a disc
with an unsupported file system. It may be possible to play back the disc, but
recording is not possible. Exchange the
disc for one formatted in a file system
supported by this unit. Alternatively, format
the disc
(see page 39).
File System
b) on, limit, off An attempt was made to record to a disc
when its file system was set to inhibit
recording.
Message in time
data display Display
condition
a)
Description Action
Message in time
data display Display
condition
a)
Description Action
No Disc! on A recording, playback, search, or other
command was received with no disc
loaded. Try the operation again after loading a disc.
REC INHI.! on A recording, E-E display, or edit preset
command was received for a write-
protected disc. Try the operation again after setting the
Write Inhibit tab to the recording enabled
position.
REC INHI.! on A recording, E-E display, or edit preset
command was received with extended
menu item 310 “REC INHIBIT” set to
“on.” Try the operation again after setting
extended menu item 310 to “off.”
See 8-3-2 “Extended Menu Operations”
(page 110) about how to make this setting.
IMX50 Clip
IMX40 Clip
IMX30 Clip
DVCAM Clip
4CHx24 Clip
8CHx16 Clip on, limit A recording, E-E display, or edit preset
command was received with basic menu
item for a disc recorded in a format
different from the specification of basic
menu item 031 “RECORDING
FORMAT.” Try the operation again after changing the
setting of basic menu item 031.
See 8-2-2 “Basic Menu Operations” (page
95) about how to change this setting.
Run Salvage on, limit A recording, E-E display, or edit preset
command was received for a disc that
needs clip recovery (salvage). Try the operation again after recovering
clips from the disc (salvage function).
See 3-5-7 “Handling of Discs When
Recording Does Not End Normally
(Salvage Function)” (page 39).
i.LINK! on, limit An edit preset command was received
with an input signal from the S400
(i.LINK) connector selected. To perform this operation, use the VIDEO
INPUT SEL button to select a signal other
than “i.LINK.”