Sony XDCAM PDW-1500 - Manual (Page 35)

Chapt
er
3
P
rep
ar
at
ions
35
3-4 Superimposed Text Information
Note
The time zone is reset to the factory default when you
execute the maintenance menu item “RESET ALL
SETUP.” You will need to set it again. The date and time
are not reset.
3-4 Superimposed Text
Information
The video signal output from the VIDEO OUT 2 (SUPER)
connector or the SDI OUT 2 (SUPER) connector contains
superimposed text information, including time code, menu
settings, and alarm messages.
Adjusting the text display
You can adjust the position, size and type of the
superimposed text using basic menu items 002, 003, 005,
009, 011, and 012.
For details, see 8-2-1 “Items in the Basic Setup Menu”
(page 92).
Information displayed
Note
The display shown above corresponds to the factory
default settings of the unit. You can change the type of
information to be displayed in the lower line of the display
by changing the setting of basic menu item 005
“DISPLAY INFORMATION SELECT.”
For details, see 8-2-1 “Items in the Basic Setup Menu”
(page 92).
T C R 0 0 : 0 4 . 4 7 . 0 7 *
B 1 P L A Y L O C K
5 Menu setting states
1 Type of time data
2 Time code reader drop frame
mark (for 525 line mode only)
3 Time code generator drop
frame mark (for 525 line
mode only)
4 VITC field mark
Time data
7 Playback condition
mark
6 Operation mode