Siemens MCC-3298 - Manual (Page 27)

25
3 Operating the SAMMS-LV Device
SAMMS-LV
Function Number Function SAMMS-LVX SAMMS-LVE
F0 Ambient temperature • •
F1 Control circuit number • •
F2 Size for overload No. 1 • •
F3 Size for overload No. 2 (low speed) •
F4 Full load current for OLR No. 1 • •
F4A 5A CT primary current (if used) • •
F5 Full load current for OLR No. 2 •
F5A 5A CT primary current (low speed) (if used) •
F6 Service factor • •
F7 Overload trip class (class 2 through 23) • •
F8 Automatic reset •
F9 Phase unbalance • •
F10 Time to restart • •
F11 Emergency restart • •
F12 Ground fault protection or warning • •
F12A Ground fault pickup current • •
F13 Timer No. 1 • •
F14 Timer No. 2 • •
F15 Motor current • •
F16 Last trip current • •
F17 Percent unbalance current • •
F18 Total elapsed run-time on motor • •
F19 Total number of motor starts • •
F20 Number of overload trips • •
F21 Reset motor data • •
F22 Set process current warning •
F23 Jam protection •
F23A Jam pickup current •
F24 Loss of load protection or warning •
F24A Loss of load pickup current •
F25 Motor winding temperature as % of full load temperature • •
F26 Baud rate • •
F27 Address • •
Table 3.7 SAMMS-LV models and functions