Sharp MX-3100N - Manual (Page 151)

2-37
COPIER
Contents
Paper folding function
When a saddle stitch finisher is installed, the fold function can be used to fold printed output in half.
Paper sizes that can be folded using the paper folding function are 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A4R, B4, A3,
16KR, and 8K. For detailed information on the sizes and types of paper that can be folded, see the specifications in the
Safety Guide.
Touch the [Fold] key to open the fold settings screen. To fold inward (printed side inside), touch the [Fold Inside] key. To
fold outward (printed side outside), touch the [Fold Outside] key.
• Special media such as transparency film and tab paper cannot be used.
• When the paper folding function is selected, the staple or hole punch function cannot be used.
• When two-sided printing is disabled in the machine's system settings (administrator), the paper folding function cannot be
used.
Fold inside Fold outside
Output
Fold
Select fold direction for 1-sided copy.
Select fold direction of Side 1 for 2-sided copy.
Fold copies inside.
OK
OK Cancel
Fold Inside
Fold Outside