Sharp MX-3100N - Manual (Page 73)

1-32
BEFORE USING THE MACHINE
Contents
TRAY SETTINGS OF TRAY 5 (LARGE
CAPACITY TRAY)
LOADING PAPER
The large capacity tray can hold up to 3500 sheets of 8-1/2" x 11" or A4 size paper (20 lbs. (80 g/m 2 )).
The paper size of tray 5 can only be changed by a SHARP service technician. If you need to change the paper size,
consult your dealer or nearest SHARP Service Department.
1
Pull out the paper tray.
Gently pull the tray out until it stops.
2
Fan the paper.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
3
Place the paper in the center of the
paper table.
Load the paper with the print side face down. The stack must
not be higher than the indicator line (maximum of 3500 sheets).
Indicator
line